Philips CCZ254AT - Manual (Page 40)

40 Setting Up the VCR Plus+ Programming System (cont’d)
2
Now, compare the channel numbers you have written in the VCR
PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some
stations have VCR Plus+ and Cable/TV channel numbers that are
the same, and other stations have channel numbers that do not
match. Where the channel numbers DO NOT match, you must
tell the TV/VCR the VCR Plus+ and Cable/TV channel numbers
according to the following steps.
● Make each entry within 60 seconds of the previous entry.
6
Look at the lists you filled in on page 39. For stations whose
VCR Plus+ and Cable/TV channels do not match, press
the CH(annel). Up/Down buttons until the arrow is beside
the VCR Plus+ channel you need. Then, press the
Number buttons to enter the corresponding Cable/TV
channel from your list. (Enter a “0” before single-digit chan-
nels.) Continue this process until you have entered all the stations
on your list.
Note: If you are using a Cable Box/DBS, the Cable/TV channel will
be 03 or 04 (the Cable Box/DBS output channel) for every VCR
Plus+ channel. You must set the Cable Box/DBS to the channel
you want to record; leave the Cable Box/DBS on for the timer
recording.
7
Press the STATUS/EXIT button.
• To correct a Cable/TV channel num-
ber, repeat the steps on this page.
• To clear a Cable/TV channel num-
ber, repeat steps 3-5 on this page.
Then, press the CH(annel)
Up/Down buttons to select it. Then
press the CLEAR button. Press the
STATUS/EXIT button.
• Always enter a “0” before single-
digit channels.
• To select line input for the Cable/TV
channel, press 0,0. A/V IN will
appear on-screen.
Helpful Hints
5
Press the Number 5 button to select VCR PLUS+ REF.
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ CABLE/TV
124 – –
125 – –
01 – – – – B 23
02 – –
03 – –
TO SELECT CH PRESS CH ▲▼
TO DELETE PRESS CLEAR
TO END PRESS EXIT
VCR PLUS+ CROSS REF. MAP
VCR PLUS+ CABLE/TV
124 – –
125 – –
01 – – – – B – –
02 – –
03 – –
TO SELECT CH PRESS CH ▲▼
THEN ENTER CH NO.
TO END PRESS EXIT
2 Examine the lists on
page 39.
3
Press the COMBI button, then press the MENU button.
4
3
7
6
5
VAR.SLOW
CABLE/DBS COMBI
VOL.
CH.
A.CH +100
3
6
9
0
2
5
8
1
4
7
TRACKING F.ADV
SLEEP
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD REW
MEMORY
SLOW
MUTE
VCR PLUS+
/ENTER
SMART
PICTURE
SKIP
SEARCH
INDEX
SEARCH
EJECT
MENU CLEAR
PAUSE/STILL
4
Press the PLAY/▲ button or the STOP/▼ button to select
VCR SETUP, then press the F.FWD/B button.
CCZ254comb.QX33 4/6/99 9:02 PM Page 40