Proxima ASA Proxima DP5500 - Manual (Page 27)

Using the Desktop Projector 5500 3-3
CONTROL PANEL KEYS
Use the DP5500’s control panel keys to turn the projector on or off, adjust
the projected image, and to display and hide the menus. Power, warning,
and alert lights give you important information about how your projector is
working.
KEY FUNCTION
STANDBY/ON Turns the lamp on or off.
INPUT Switches between active connected video inputs.
MUTE Turns the Audio on or off.
ZOOM +/- Zooms in and out. Press + to make the picture
larger. Press - to make the picture smaller.
FOCUS +/- Adjusts the focus of the image.
MENU Controls the menu.
RESET Resets all image settings to the factory defaults.
Hold the button down to display the number of
hours that the lamp has already been used.
Figure 3-2 Control Panel keys
MENU
Press any of the MENU keys to display the menu options over the projected
image. If a menu selection is not made within five seconds, the menu will
disappear. Menu settings are automatically stored when you exit the menus
or turn off the projector. See page 3-9 for more information about using the
menus.
FOCUS
MENU
RESET
ZOOM
MUTE
INPUT
ON
LAMP
TEMP
STANDBY
/ON
+
–
+
–