Proxima ASA Proxima DP5500 - Manual (Page 42)

4-2 Chapter Four
REPLACING THE LAMP
1 Turn off the projector.
2 Unplug the projector’s power cord from the wall socket and remove it
from the projector’s power receptacle.
3 Remove the screw on the right side of the rear panel and remove the
service door.
Figure 4-1 Removing the service door
4 Unscrew the four lamp assembly screws (they will not come out of the
lamp assembly).
Figure 4-2 Unscrewing the lamp assembly retaining screws