Pioneer SUPER TUNER III AVIC-Z3 - Manual (Page 17)

15
Chapter 2
How to Use
the Na
viga
tion System a
n
d Na
mes of t
h
e Pa
rts
r The built-in DVD drive plays one, standard, 12-
cm or 8-cm (single) disc at a time. Do not use
an adapter when playing 8-cm discs.
r If you cannot insert a disc completely or if an
inserted disc is not recognized, check that the
label side of the disc is up. Press the EJECT
button to eject the disc, and check the disc for
damage before inserting the disc again.
r If the built-in DVD drive does not operate prop-
erly, an error message may be displayed.
ò Error messages Þ operation manual
Ejecting a disc
1
Press the OPEN CLOSE button.
The LCD panel opens.
2
Press the EJECT button.
The disc is ejected.
3
Press the OPEN CLOSE button.
The LCD panel closes.
Adjusting the LCD Panel Angle
• When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
• Do not open and close the LCD panel with
hands by force. This may cause malfunc-
tion.
1
Press and hold the OPEN CLOSE button.
The angle adjustment screen appears.
2
Touch [+] or [–] to adjust the angle.
Five levels of angle are available.
3
Touch [Back].
r The adjusted angle of the LCD panel will be
memorized and the LCD panel will auto-
matically return to that angle the next time
the LCD panel is opened or closed.