Panasonic CinemaVision PT 53WX42 - Manual (Page 37)

R OLLER G UIDE I CON M ENU O PERATION
35
l
Other Adjustments (contd.)
r CONVERGENCE 1 - In SET UP menu select CONVERGENCE 1 under OTHER ADJ. only after moving the PTV to adjust for the
effects of the earth’s magnetic field on the projection tubes. Only use the remote control buttons while adjusting
convergence. The front control panel navigation and Action buttons have no affect.
Note: Convergence seldom needs adjusting except after moving the PTV.
r Use the navigation buttons on the remote control to align the horizontal and vertical green lines on screen with the outside
reference marks on screen frame, as shown below.
r
Use the navigation buttons on the remote control to align the red cross with the white cross pattern at the center of the screen.
Note: To prevent picture tube damage do not leave test pattern on for an extended period of time.
Convergence Adjustment
An adjusted cross pattern appears white with a
minimum of color fringing.
r Press VOL u to display next menu.
OTHER ADJ.
SET UP
AUTO POWER
IDIOMA/
LANGUE
PROG CHAN
CC
SET
CHAN BANNER ON K
CONVERGENCE 1 K
CONVERGENCE 2 K
CONVERGENCE
GREEN
NEXT : ACTION
Reference Marks
r
Press to display RED convergence menu.
ACTION
screen fame
r Press to store adjustment and to
display normal picture.
ACTION
CONVERGENCE
RED
NEXT : ACTION
CONVERGENCE
BLUE
NEXT : ACTION
r Press to display BLUE convergence
menu.
r Then repeat procedure for adjusting blue.
ACTION