Panasonic AG-DVC30P - Manual (Page 12)

12
Checking the system operations
Connecting the power cord
Getting ready
1
Connect the DC cord to the DC input socket.
After purchasing your camera-recorder, follow
the instructions for checking the system
operations to ensure that the unit is working
properly before you attempt to shoot anything.
2
Connect the other end of the DC cord and
one end of the AC cord to the AC adapter.
3
Plug the other end of the AC cord into the
power outlet.
2
2
3
1
The AC adapter is designed to switch over
automatically to the supply voltage (110 V,
120 V, 220 V or 240 V) and frequency (50 Hz
or 60 Hz) of every country in the world.
However, in some countries the power outlet
may be a different shape. If this is the case,
you will have to purchase an adapter plug
that fits your power outlet; however, only do
this after consulting with your dealer.
Connect the cords properly as shown in
the figure above.
The battery cannot be charged when power
is being supplied to the camera-recorder
from the AC adapter.
AC adapter
AC cord
DC cord
Mini DV cassette tape