Screen displays, Displays in camera and vcr modes – Panasonic AG-DVC30P User Manual
Page 65
65
DISPLA
YS
21. Shutter speed
The shutter speed used for shooting is
displayed here. (P43)
22. White balance information
The white balance information is displayed
here. (P45, P46)
23. Manual focus control
“MF” is displayed here when the focus is
controlled manually. (P42)
24. Vibration reduction (
)
“
” is displayed here when the vibration
reduction function is used. (P38)
25. Digital zoom
This display appears when the digital zoom
function is used. (P36)
26. Zoom position
The zoom position from Z00 (max. wide
angle) to Z99 (max. telephoto) is displayed
here.
27. Operation control
The operation control mode of the camera-
recorder is displayed here.
No display : Auto mode
MNL
: Manual mode
: This is displayed while the AE
lock function is working. (P41)
28. Zoom value
The zoom value is displayed here for
several seconds when it has been changed.
“D” appears when the digital zoom function
is being used.
29. Operation mode displays
REC
: Recording
¥
: Recording (for self-portraits)
PAUSE
: Recording standby
¥ ;
: Recording standby
(for self-portraits)
;
;
: Playback pause
STNDBY : Standby
(cylinder heads stopped)
A.DUB
;
;
: Audio dubbing standby
A/DUB
1
1
: Audio dubbing
1
1
: Playback
5
5
(
6
6
) : Fast forward/cue (rewind/review)
?
?1
1
(
2
2?
?
)
: Slow playback (slow playback in
reverse direction)
AE
LOCK
CHK
: Rec check
9
9
(
:
:
) : Cue-up (cue-up in reverse
direction)
;
;1
1
(
2
2;
;
) : Frame feed playback (frame
feed playback in reverse
direction)
BLANK : Blank search
k
1
1
/k
5
5
(k
2
2
/k
6
6
):
Variable-speed search (variable-speed
search in reverse direction)
30. One-shot recording
An asterisk (2) appears when the camera-
recorder has been set up for frame feed
recording. It blinks in the shooting pause
mode. (P40)
31. Counter
The following data is selected in turn each
time the COUNTER button is pressed.
0 : 00. 0:
Counter value
M 0 : 00. 0:
Counter value in counter memory mode
TC XX : XX : XX. XX:
Time code value. “TC2” appears when
this value cannot be read correctly from
the tape.
UB XX XX XX XX:
User’s bit value. “UB2” appears when
this value cannot be read correctly from
the tape.
32. Filename used
The name of the scene file used for the
current shooting is displayed here. (P73)
Screen displays
(cont.)
Displays in CAMERA and VCR modes