Panasonic AG-DVC30P - Manual (Page 74)

74
The underlining indicates the factory setting.
Menu configuration
(cont.)
SEARCH
(VCR) Use this to set the operation to be
performed when an INDEX button (9 or
:) on the remote control unit is pressed.
PHOTO:
A photo search is conducted. (P53)
SCENE:
An index search is conducted. (P53)
32K (12bit)
AUDIO
(VCR) Use this to set the sound to be output as
CH1 and CH2 signals when playing back a
tape that was recorded in the 32K (12-bit)
audio mode.
ST1:
This selects the sound that was recorded
during shooting.
CH1 signals = CH1 track
CH2 signals = CH2 track
ST2:
This selects the sound that was dubbed
on the recording.
CH1 signals = CH3 track
CH2 signals = CH4 track
MIX:
This mixes the sound that was recorded
during shooting and the sound that was
dubbed on the recording.
CH1 signals = CH1 + CH3 tracks
CH2 signals = CH2 + CH4 tracks
<Note>
When sound is recorded in the 48K (16-bit)
audio mode, CH3 and CH4 do not exist so
the following always stands:
CH1 signals = CH1 track
CH2 signals = CH2 track
AUDIO OUT
(VCR) Use this to set the audio signals to be
output from the AV IN/OUT jack when the
tape is played back.
CH1•CH2:
CH1 output = CH1 signals
CH2 output = CH2 signals
CH1:
CH1 output = CH1 signals
CH2 output = CH1 signals
CH2:
CH1 output = CH2 signals
CH2 output = CH2 signals
32K (12bit) AUDIO item/AUDIO OUT item settings and audio track signals output from
the AV IN/OUT jack
Audio recording
mode
AUDIO OUT
item setting AV IN/OUT jack
CH1 output
AV IN/OUT jack
CH2 output
32K (12bit) AUDIO
item setting
32K (12-bit)
48K (16-bit)
CH1•CH2
CH1
CH2
CH1
CH1
CH2 CH2
CH1
CH2
ST1
CH1•CH2
CH1
CH2
CH3
CH3
CH4 CH4
CH3
CH4
ST2
__ CH1+CH3 CH2+CH4 MIX
CH1•CH2
CH1
CH2
CH1
CH1
CH2 CH2
CH1
CH2
__
PLAYBACK FUNCTION screen
Item/
(Display
mode)
Description of settings
Item/
(Display
mode)
Description of settings