Panasonic DMR-ES20DEB - Manual (Page 46)

ENTER ENTER Display Settings Option
ENTER ENTER Connection Settings Option
Tuning
Others
Disc
Picture
Sound
Display
Connection
SETUP
TV Aspect 16:9
Progressive Off
TV System PAL
AV1 Output RGB
AV2 Settings
SELECT
RETURN
TAB
On-Screen Messages
Grey Background
On: The grey background is displayed when there is no television reception.
FL Display
Change the brightness of the unit display.
[Automatic] [Off]
[Bright] [Dim]
[Automatic] [Off]
Automatic: The screen messages are displayed on the screen.
TV Aspect
TV System
Select the TV picture format of your television set.
Progressive
Letterbox: Black bar appear at the top and bottom of your screen.
[16:9] [4:3] [Letterbox]
[PAL] [NTSC]
[On] [Off]
On: In COMPONENT VIDEO OUT mode, the signal is displayed in full picture quality.
PAL: You connect the unit to a PAL or multi-system television set.
Programmes that were recorded with NTSC are played back as PAL60.
NTSC: You connect the unit to an NTSC television set.
Programmes that were recorded with NTSC are played back as NTSC.
AV1 Output
[Video ( with component )] [S Video (with component)]
[RGB ( without component )]
Only COMPONENT VIDEO OUT.
Switch to RGB for an improved picture quality.
If RGB is set, no signal is available at COMPONENT VIDEO OUT.
DVB Preferred Subtitles
New Service Message
[On] [Off]
Select the language for DVB Subtitles.
Tuning
Disc
Picture
Sound
Display
SETUP AV2 Settings
Connection
AV2 Input RGB/Video
Others
Ext Link Ext Link 1
New Service
Yes No
A new DVB service has been found.
Add to the list of "All Services"?
Tuning
Others
Disc
Picture
Sound
Display
Connection
SETUP
On-Screen Messages Automatic
Grey Background On
FL Display Bright
SELECT
RETURN
TAB
DVB Preferred Subtitles English
New Service Message Automatic
Automatic: New digital stations are constantly scanned in the background. A message is displayed if new stations
were found and you can add them to you station list.
AV2 Input
RGB / Video
RGB
RETURN
SELECT
ENTER
S Video
Video
AV2 Settings
Perform the settings in the following sub menus for the connected device.
AV2 Input
RGB / Video: Is detected automatically.
RGB, Video, S Video: Input is switched to the selected signal.
Ext Link
Ext Link 1: For digital receivers that send a special recording control signal, e.g. the F.U.N. receiver (TU-DSF41).
Ext Link 2: External recording control for satellites or digital receivers (video signal).
[RGB / Video] [RGB] [Video] [S Video]
AV2 Input, Ext Link
[Ext Link 1] [Ext Link 2]
Tuning
Others
Disc
Picture
Sound
Display
SETUP
Connection
TV Aspect 16:9
Progressive
TV System PAL
AV1 Output RGB
AV2 Settings
SELECT
RETURN
TAB
Off
46
FUNCTIONS Selection Menu
SETUP
To Others
F U N C
T IO
N S
DVB only
DVB only