Philips CDR820/17 - Manual (Page 24)

Recording with automatic start
Recording with automatic start from an external
source
Note: External recording is only possible at normal speed (1x).
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Press AUX repeatedly to select the input for the external
source you want to record from.
➜ AUX Digital is displayed if the digital coaxial input
(DIGITAL IN) is selected.
➜ AUX Optical is displayed if the digital optical input
(OPTICAL IN) is selected.
➜ AUX Analog is displayed if the analog input (ANALOG
IN) is selected.
3 Press RECORD on the set to enter into the recording
menu.
4 Rotate the ¡ EASY JOG ™ control to select either:
➜ AUX CD ?: for recording with synchronised start of an
entire disc.
➜ AUX Track ?: for recording with synchronised start of
a single track.
5 Press YES to confirm your selection.
➜ Press Play On External Source is displayed.
6 Start playback on the external source you wish to record
from.
➜ Recording starts simultaneously. RECORD IN PROGRESS is
shown and the actual recording time left starts to count
down.
Note: If you start playback on the selected source within a
track, recording starts at the beginning of the next track or
after 2.7 seconds of silence for analog sources.
7 If a digital source is selected:
After the recording process, the CD recorder stops
automatically.
Note: Recordings from DAT or DCC will automatically stop
after 20 seconds silence.
If an analog source is selected:
After the recording process, the CD recorder stops after a
silence of 20 seconds on the source material.
0 To stop manually, press STOP 9 on the set.
➜ RECORD IN PROGRESS goes off.
Do not forget to finalize!
Manual recording
Manual recording from an external source
This feature enables you to manually start and stop a
recording from any external source.You can use manual
recording for recording live music, or for particular music
like classical music which cannot be recorded with
automatic start.
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Press AUX repeatedly to select the input for the external
source you want to record from.
➜ AUX Digital is displayed if the digital coaxial input
(DIGITAL IN) is selected.
➜ AUX Optical is displayed if the digital optical input
(OPTICAL IN) is selected.
➜ AUX Analog is displayed if the analog input (ANALOG
IN) is selected.
3 Press RECORD on the set to enter the recording menu.
4 Rotate the ¡ EASY JOG ™ control to select the record
type.
➜ AUX Manual ?: for manual start of recording
5 Press YES to confirm your selection.
➜ Preparing is displayed.
➜ Record ? is displayed, followed by AUX and the
remaining recording time of the CDR(W).
Both messages will be swapped continuously.
6 Start playback on the external source in order to set the
optimal recording level on the CD recorder (see “Adjusting
the Record Level”).
7 Stop playback on the external source.
8 Go to the beginning of the desired track.
9 Press YES and simultaneously start playback on the external
source.
➜ Recording starts. RECORD IN PROGRESS is shown and
the actual recording time left starts to count down.
Note: If Check Input is flashing, check the digital
connection.
10 To stop recording, press STOP 9 on the set.
➜ Update is displayed and RECORD IN PROGRESS goes
off.
Do not forget to finalize!
External recording
24
English
xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 24