Philips AZ5740 - Manual (Page 23)

6 Other features
Record
Note
To record, use only “Normal” (IEC type I) tapes on which the write- •
protect notches (tabs) are not broken.
Tip
When you play or record a tape, the sound source cannot be •
changed.
The best recording level is set automatically. Change of volume and •
sound effect does not affect recording.
Note
The quality of recorded sound can differ depending on the source •
and the tape used.
Record from disc to tape
1
Press STOP/OPEN to open the tape door.
2
Load a tape.
3
Push the source selector on the main unit to DISC to select
disc source.
4
Load a disc.
5
Start disc playback.