Connections, Connecting the rf in terminal, Caution – Panasonic PV DR2714 User Manual
Page 12
12
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo
Connections
Antenna Connection
Connect the cable from Antenna to the VHF/UHF terminal on
the unit.
Cable Connection
Connect the cable supplied by your local cable company
to VHF/UHF terminal on the unit.
Overtightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.
• Turn off the power supply for all com ponents before making any connections.
• If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to
fashion a cable to suit the component concerned.
• Read the instruction manual for each system component care fully before connecting it.
Notes on con nections
Connecting the RF in Terminal
Note to CABLE system installer:
This re minder is pro vided to call the CABLE (Cable TV) System
Installer’s at tention to Article 820-40 of the NEC that pro vides
guidelines for proper grounding and, in par ticular, specifies that
the cable ground shall be con nected to the ground ing system of
the build ing, as close to the point of cable entry as practical.
Mixer
VHF
Antenna
UHF
Antenna
Or
Cable Box
In from CABLE
CAUTION