Panasonic KX-PW37CL - Manual (Page 4)

4
Installations and connections
Installing the ink film
1
2
Control panel
“T” shaped
gear (blue)
New ink film
2
1
“T” shaped gear (blue)
Right slot
Blue core
“T” shaped
gear (blue) Ink film is slack.
Click
White core White core
2
Take out the ink film from the bag, and find the “T”
shaped gear (blue).
5
If the ink film is slack, tighten it by winding the gear.
4
Insert the white core into the slots shown in the
picture below.
6
Close the control panel by pressing down on both
sides.
● Make sure to close the control panel until it locks.
3
Hold the ink film like in the picture below.
Insert the blue core into the right slot of the main
unit.
Insert the “T” shaped gear (blue) into the left slot
of the main unit.
1
Press the control panel open button ( ) to open the
control panel ( ). 2
1