Panasonic KX-PW37CL - Manual (Page 6)

6
Installations and connections
Connecting the main unit
Telephone line cord
Wall jack
Power cord
Power outlet
AC 100V
Click Click
Click
1 2 3
4 5 6
7 8 9
0
(77 SELECTY indicator)
1
Extend the antenna and raise it vertically.
2
Connect the cord and place the handset on the
main unit.
3
Connect the telephone line cord.
4
Connect the power cord.
➡ You will hear the following message about
KDDI’s 77 SELECTY service in Japanese.
Thank you for purchasing a Panasonic facsimile.
This unit will automatically select using KDDI’s
“0077” long distance call service. If you do not want
to use this service, press “
(Function)”, “
(77 SELECTY)”, and “ ”. Then, please make sure
the “ (77 SELECTY indicator)” is turned off.
5
Decide if you want to subscribe to “77 SELECTY” service.
If you press (Start) or leave the unit for about 2
minutes, the unit automatically starts to set up for
“77 SELECTY” service. If you do not want to subscribe
to this service, see the message in step 4 for
instructions.
This unit will automatically select the dialing mode
(Tone/Pulse).
Subscribing to “77 SELECTY”
An automatic online setup will start in an hour.
➡ After the online setup is completed, 77 SELECTY
indicator will light in green to show that 77 SELECTY
service is ready to be used.
During the online setup, your telephone number will be
sent to KDDI.