Maintenance, Lubrication recommendations – Polaris 2009 99 Ranger User Manual

Page 71

Advertising
background image

62

MAINTENANCE

Lubrication Recommendations

Item

Lube Rec.

Method

Frequency*

1.Engine Oil

Polaris Pre-
mium 4 Syn-
thetic 0W40

Add to proper level on dipstick.
See page 37.

Check level dai-
ly.

2. Brake Fluid

DOT 3 Only

Maintain level between fill lines.
See page 78.

As required;
change every
two years or 200
hours

3. Transmission

Oil

Polaris Pre-
mium Syn-
thetic chain
case lube

Add to FULL level on dipstick.
See page 66.

Change annually
or at 100 hours

4. Front Gear-
case Oil

GL5 80-90
Weight Gear
Lube

Fill to bottom thread of filler hole.
Make certain machine is on level
surface.

Change annually

5. Center Half-
shafts

Grease

+

Locate Fittings and Grease

Every 3 months
or 50 hours

6. Front Prop
Shaft U-joints

Grease

+

Locate Fittings and Grease

Every 3 months
or 50 hours

7. Front Prop-
shaft Yoke

Grease

+

Locate fittings and grease – 3
pumps maximum

Every 3 months
or 50 hours

8. Demand 6

Hubs - All
Wheel Drive

Premium
Hub Lube

Remove set screw in hubs. Ro-
tate wheels to 4 O’clock position.
If lubricant is not visible add more.
Reinstall set screw.

Annually or at
100 hrs

9. Front Drive

Axle (U Joint)

Grease

+

Locate grease fitting and grease
with grease gun.

Every 3 months
or 50 hours

10. Ball Joint

Grease**

Locate fitting on back side of
struts and grease with grease
gun.

Every 3 months
or 50 hours

Advertising