Precor S3.23 - Manual (Page 10)

S3.23 Assembly and Maintenance Guide
page 10
1 2 3 4 5 6
D. Have your assistant slide the Top Weight Assembly
and Selector Stem off the Guide Rods. Ask your
assistant to hold the Top Weight Assembly away
from the Guide Rods while you install the weights.
E. Add the ten 10-lb weights and the ten shorter-
length 5-lb weights. Note that the curve on the
weight plate faces inside. Hold your finger over the
plastic bushing in each weight to prevent the
bushing from popping out.
CAUTION: The weights are heavy! Handle the
weights carefully so as not to drop them or
injure yourself. Pick up and place one weight at
a time on the Guide Rods. Do not angle the
Guide Rods to such a degree that they
dislodge the Base Bumpers and come out of
the Base Frame.
Step 2. Assemble Weight Stack, Continued
Top Weight
Assembly
Guide Rod
Bracket and
Bumpers
E
D
Guide Rod
Guide Rods
Ask your assistant to hold the Top Cap Weight
Assembly away from the Guide Rods while you
install the weights.
Base Bumpers
Base
Frame
Selector Stem