Precor S3.23 - Manual (Page 18)

S3.23 Assembly and Maintenance Guide
page 18
1 2 3 4 5 6
Adjustments and Maintenance, Continued
1. Cable Adjustments
A Cam Washer ensures easy cable adjustments.
A. To remove the slack in the cable. Use two ⁹⁄₁₆-inch
wrenches to loosen the fastener that holds the
Cam Washer.
B. Rotate the Cam Washer so that the slack is
removed.
C. Check the Top Cap Weight to make sure it remains
well-seated on the Weight Stack and then wrench
tighten the Cam Washer fasteners.
D. Check the Selector Stem alignment by inserting
the Weight Pin into every hole on the Weight Stack.
Cam Washer
Top Cap
Weight
A
B
C