Pioneer Super Tuner III DVH-P7050 - Manual (Page 15)

Before You Start
En 15
9 ANGLE button
Press to change the viewing angle during
playback when the built-in player is playing
as the source.
p PLAY/PAUSE (
6
) button
Press to switch sequentially between play-
back and pause play.
q REVERSE (
1
) button
Press to perform fast reverse playback or
seek tuning while the tuner is playing as the
source.
w PREVIOUS (
4
) / F button
When the remote control is set to DVD
mode, press to return to the previous track
(chapter). If the remote control is set to
DVH
mode, the function menu appears on the
head unit display.
e NUMBER buttons
Press to directly select the desired track,
chapter, preset tuning and disc. Buttons 1-6
can operate the preset tuning for the tuner or
disc number search for the multi-CD player.
r SOURCE button
Press to select the desired source.
t Joystick
Move to select the setting. Click the joystick
to set the setting or select on or off.
y Remote control operation mode switch
Switch the operation mode between DVD
mode (only the built-in player can be oper-
ated by the remote control) or
DVH mode (all
sources of this unit can be operated by the
remote control). (Refer to page 12.)
u BAND/ESC button
Press to select the tuner band or cancel the
setting mode.
i POWER button
Press to switch the DVD player on or off
while the DVD is operated from the rear seat.
o STEP (
E
/
e
) buttons
Press to move ahead one frame at a time
during playback. Press and hold for one
second to activate slow playback.
; ATT button
Press to quickly lower the volume level by
about 90%. Press once more to return to the
original volume level.
a FORWARD (
¡
) button
Press to perform fast forward of playback or
seek tuning while the tuner is playing as a
source.
s STOP (
7
) button
Press to stop playback while the built-in
player is playing as the source.
d NEXT (
¢
) / A button
When the remote control is set to DVD
mode, press to return to the previous track
(chapter). If the remote control is set to
DVH
mode, the audio menu appears on the head
unit display.
f CLEAR button
Press to cancel the input number while the
NUMBER buttons are used.
English
Español
Deutsch
F
rançais
Italiano
Nederlands
01
Section