Pioneer Super Tuner III DVH-P7050 - Manual (Page 58)

Audio Adjustments
Adjusting treble
You can adjust the cut-off frequency and the
Treble level.
• In
FRT1 and FRT2 modes, treble adjustment
affects only the front output: rear output cannot
be adjusted.
1 Press A to select Treble .
Press A until Treble appears in the display.
• Pressing AUDIO on the head unit also per-
forms the same operation.
2 Select the desired frequency with
1 or ¡.
Press
1 or ¡ until the desired frequency
appears in the display.
2.5k — 4k — 6.3k — 10k (Hz)
• Pressing
2 or 3 on the head unit also per-
forms the same operation.
3 Press E or e to adjust the treble level.
Each press of E or e increases or decreases
the treble level. +6 – –6 is displayed as the level
is increased or decreased.
• Pressing
5 or ∞ on the head unit also per-
forms the same operation.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1 Press A to select Loud .
Press A until Loud appears in the display.
• Pressing AUDIO on the head unit also per-
forms the same operation.
2 Press
E to turn loudness on.
Loudness level (e.g., Loud Mid ) appears in the
display.
• Pressing
5 on the head unit also performs
the same operation.
3 Press
1 or ¡ to select the level.
Press
1 or ¡ until the desired level appears
in the display.
Low (low)— Mid (mid)— High (high)
• Pressing
2 or 3 on the head unit also per-
forms the same operation.
4 Press e to turn loudness off.
Loud OFF appears in the display.
• Pressing
∞ on the head unit also performs the
same operation.
En 58
08
Section