Panasonic KX-PS8100 - Manual (Page 40)

Chapter 2
40
Setup
This chapter describes setting up the KX-PS8100 system, connecting it to a
computer, and powering on the printer.
Setting up the printer
The general steps for setting up the printer are:
• “Preparing the color imaging unit” on page 40
• “Setting up the output tray” on page 41
• “Installing the toner cartridges” on page 42
After you have unpacked the printer and located it on a flat, stable surface,
you need to set it up.
To prepare the color imaging unit:
1 Open the printer’s front door.
Preparing the color
imaging unit