Panasonic PT-AE1000E - Manual (Page 9)

Waveform Monitor
The PT-AE1000E gives home consumers
a projector with the kind of waveform
monitor used in equipment for
professionals. This function displays
waveforms to show how the PT-AE1000E
has adjusted the images of the input
signals sent from the source device. In
cases where the output level of the
source device fluctuates, you can view the
waveform on the screen and adjust the
image brightness and contrast to match
standard levels. In cases where the
characteristics of the output signal from
the source device are distorted, viewing
the waveform can make it easier for you
to adjust the picture so it looks just the
way the director intended.
Cinema Colour Management (CCM)
This is an innovative colour correction
system that enables free control of colours
with CCM technology. You can adjust one
colour without affecting the neighbouring
colours. This makes it easier to achieve
just the right colour equalisation in hue,
luminance and saturation. User Equalising Function
Incorporating Cinema Colour Management
technology, the PT-AE1000E has a user
equalising function that lets you decide
precisely how images look on your screen.
In each of the seven preset picture modes,
the high, mid, and low gamma levels are
adjustable. The PT-AE1000E features a
broader adjustment range than earlier
models and control screens that are more
legible and easy to use. This makes
customising the picture fun and provides
professional results. You can even store up
to three sets of adjustment settings in
memory for use any time.
Built-In Test Pattern
For quick and easy
adjustment of zoom
and focus, two test
patterns are built-in.
9
The Same Imaging Technologies Found in Professional Equipment
Adjustment Functions that Put You in Control of the Picture
Waveform Monitor
Colour before adjustment
Cursor Cinema Colour Management
Adjusted colour
You can easily achieve standard
black and white levels while monitor-
ing the luminance signal component
on the screen.
You can also monitor the exact signal component that you
want—for the full screen or for any desired horizontal
line. You can display the luminance (Y), red (R), green (G),
or blue (B) component for the full screen, or for a single
line. And you can adjust the levels for the full screen.
Before compensation
The luminance level can be
displayed on the screen.
Red component for the full screen
Green component for the full screen
Blue component for the full screen
After compensation