Philips SNR6500 - Manual (Page 22)

EN
23
The Status shows ISP IP address
Network settings
Use the Home Networking menu to configure the LAN IP address
Wireless
The Wireless Range Extender (WRE) also operates as a wireless access point,
allowing wireless computers to communicate with each other. To configure this
function, you need to enable the wireless function, define the radio channel, the
domain identifier, and the security options.
Check Enable and click ‘SAVE SETTINGS’.
Channel and SSID
You must specify a common radio channel and SSID (Service Set ID) to be used by
the Wireless Range Extender (WRE) (Same as Wireless Basestation).
Make sure you configure all network elements with the same values.
WDS (In Repeater Mode only)
The Wireless Distribution System (WDS) provides a means to extend the range of a
Wireless Local Area network (WLAN).
Menu: Home Network Settings