Philips SNR6500 - Manual (Page 8)

EN
9
Connect the Wireless Range Extender (WRE) to the
Wireless Base Station: Wired
Connect the Ethernet cable to TO Modem/PC port.
Connect the other end of the Ethernet cable to a LAN port of the Wireless Base
Station (LAN1-LAN4).
The Modem/PC light of the WRE should be on/blinking.
The light of the chosen LAN port should be on/blinking of the Wireless Base Station
TO Modem/PC 5V=1A AP EC RP
Wireless Base Station 11g True Turbo
Wireless Modem/PC Power
LAN4 To Modem 12V=1A Reset LAN3 LAN2 LAN1
Wireless Base Station 11g True Turbo
1 2 3 4 Wireless Internet Modem Power