Panasonic EB-SC3 - Manual (Page 106)

103
Applications
Infrared
You can send and receive Contacts cards, pictures and sound clips
between your phone and other infrared enabled devices.
Preparing for infrared connection
Place your phone and the other device within the effective range of
the infrared connection, about 20 cm. Make sure that:
• There are no obstructions between the two devices. Nearby
activated infrared devices may cause interference.
• The infrared ports of the devices point at each other.
• On the receiving device, activate the infrared port.
• If the other device is a computer, you need to set up an infrared
connection on the computer. For example, in Windows, select
Start > Settings > Control Panel > Options tab > Enable Infrared
Communication. For specific infrared set up instructions for your
computer’s operating system, refer to the computer’s online help.
Sending data via infrared
From Contacts or My Media menu:
1. Open the item you wish to send 7 [5] (Options)
2. [192] to scroll to Send via Infrared 7 [5] (Select)
3. Your phone automatically begins infrared connection
Note: The phone may not allow you to transfer some copyrighted images,
ringtones or other contents.
Though invisible to the eye, do not point the infrared beam at anyone’s eye.
Note: The infrared connection is compliant with Microsoft Windows TM ME,
2000 and XP. Availability of the infrared connection depends on the
operating system or specification of the other device.
Note: For further details, see “Browsing the Contacts list” on page 58,
“Pictures” on page 106 or “Sounds” on page 106.