Philips AW5000 - Manual (Page 17)

15
English
EN
5
Wait until the power/status indicator on
AW5000 turns solid white, then tap Next
on the app screen..
» The following app screen appears.
» AW5000 is connected to your home
Wi-Fi network successfully.
Tip
•
For some Wi-Fi routers, you may need to hold the
WPS button for Wi-Fi connection or enable the WPS
PBC function from the router configuration pages. See
the user manuals of the specific routers for details.
•
After successful network setup, you can tap Rock n'
Roll on the above app screen to get ready for music
play directly. For more details, go to the 'Play' section
(see 'Play' on page 16).
Option 4: Set up wired
connection through an
Ethernet cable
Note
• If you use wired connection, you just need to select
Speaker already setup on the initial Setup page (see
'Download Philips AirStudio to your smartphone or
tablets' on page 6).
1
If you have tried wireless connection,
before setup of wired connection, you
need to reset the wireless Hi-Fi speaker
(see 'Troubleshooting' on page 26).
2
Connect an Ethernet cable (not supplied)
to:
• the ETHERNET socket on the back of
the device
• one of the Ethernet ports on your
home Wi-Fi router
3
Wait until the power/status indicator turns
solid white.
» AW5000 is connected to your home
Wi-Fi network successfully.
LAN4 To Modem 12V=1A Reset LAN3 LAN2 LAN1
ETHERNE
T
ETHERNET