Precor EFX 821 - Manual (Page 20)

18
Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer
2.
Attach both upright supports to the base frame using
eight buttonhead screws, eight split washers, and eight
washers. Finger tighten.
Figure 4: Attaching the upright supports
Installing the Display Console Mount
1.
Ask your assistant to hold the display console mount
above the upright supports while you connect the cable.
Remove and discard the tape after you connect the cable.
Important: Place excess cable inside the upright support.
2.
Have your assistant lower the display console mount
while you align the mounting brackets on the inside of the
upright supports.
Figure 5: Attaching the console mount to the upright supports