Precor EFX 821 - Manual (Page 24)

22
Assembling and Maintaining the EFX 821 Elliptical Fitness Crosstrainer
3.
Attach the handlebars to the link arms using two hex
head screws, two bushings, and four washers. For ease of
installation, slide the corresponding foot pedal to the top
of the ramp before attaching each handlebar.
Important: Install the fasteners in the order shown. The
bushing slides inside the link arm. The heads of the screws
remain on the ramp side of the link arm.
Figure 10: Attaching the movable arms
4.
Wrench tighten the fasteners using a ⁹⁄₁₆-inch box-end or
socket wrench.