Planet Technology DVR-860 - Manual (Page 26)

BASIC OPERATION
-20-
4.2.2 DVR-860
Press “ PLAY ” button, and the DVR will display the last recorded video.
Note: There must be at least 8192 images of recorded data for playback to work properly. If not, the device will stop
playback. For example, if the IPS is set to 30, the recording time should be at least 273 seconds (8192 images / 30
IPS) for the playback to work properly.
‧ FAST FORWARD (F.F. ) & FAST REWIND (REW):
You can increase the speed for fast forward and rewind on the DVR.
In the playback mode,
Press ” ” once to get 4X speed forward and press twice to get 8X speed, etc., and the maximum speed is 32X.
Press ” ” once to get 4X speed rewind and press twice to get 8X speed, etc., and the maximum speed is 32X.
The type of recorded image size (Frame or CIF) will also be shown on the screen.
‧ PAUSE / IMAGE JOG:
Press “ ” button to pause the current image displayed on the screen.
In the Pause mode,
Press ” ” once to get one frame forward.
Press ” ” once to get one frame rewind.
‧ STOP:
Pressing “ ” button under all circumstances will return DVR to live monitoring mode.
‧ CHANNEL SHIFT:
Display mode:
Press MODE “ ” button to select the display mode.
Full Screen Switch:
Press “＋” or “－” button to show the channel in the full screen.
Channel display switch:
Press “ ” + “ ” buttons.
Press “▲” “▼” “ ◄ ” “ ► ” to select the channel you would like to change.
Press “＋” or “－” select the channel you would like to show.
Press “ENTER” button to confirm the setting.
‧ SLOW PLAYBACK:
Press “ ” + “ ” button to get 1/4X speed playback and press twice to get 1/8X speed.
‧ AUDIO:
Press “ ” + “ “ to select live or playback sounds of the 4 audio channels.