Patton electronic 3120 - Manual (Page 102)

7 • Dial In Model 3120 RAS Administrators’ Reference Guide
102 Dial In User Statistics window
• phase2(20)—Phase 2, an advanced state of modulation in v34 and higher
• answerack(21)—acknowledgement phase of modulation
• V92(22)—V.92 modulation
• moh(23)—Modem is using V.92’s modem-on-hold feature
• v23(24)—V.23 modulation
Transmit Connection Speed (diactTxSpeed)
The connected speed of the modem link (for example, 28.8 bps). These values, in bits per second, range from
300–33,600.
Receive Connection Speed (diactRxSpeed)
The connected speed of the modem link (for example, 28.8 bps). These values, in bits per second, range from
300–53,000.
Error Correction (diactErrorCorrection)
The modem error correction scheme used during this call.
• None(1)—No error correction on the call
• V42(2)—Error correction mode
• V120(4)—Mode for ISDN B
Data Compression Protocol (diactCompression)
The modem data compression technique used during this call.
• None(1)—No compression
• V42bis(2)—Compression is running
• Stac(4)—Compression is running
• v44(5)—V44 compression is running
Modulation Symbol Rate (diactSymbolRate)
The modulation symbol rate during the call. This is used only when in V.34 and above modulations.
Locally Initiated Renegotiates (diactLocalRenegotiates)
The number of times the local modem has initiated a modem speed renegotiate.
Locally Initiated Retrains (diactLocalRetrains)
The number of times the local modem has initiated a modem carrier retrain.
Remote Initiated Renegotiates (diactRemoteRenegotiates)
The number of times the remote modem has initiated a modem speed renegotiate.
Remote Initiated Retrains (diactRemoteRetrains)
The number of times the remote modem has initiated a modem carrier retrain.