Patton electronic 3120 - Manual (Page 187)

Interfaces main window 187
Model 3120 RAS Administrators’ Reference Guide 15 • Interfaces
Type (ifType)
The type of interface, distinguished according to the physical/link protocol(s) immediately “below” the net-
work layer in the protocol stack. The following valid interface options are available:
• other(1)
• ethernet-csmacd(6)
• iso88023-csmacd(7)
• ds1(18)
• e1(19)
• basicISDN(20)
• primaryISDN(21)
• ppp(23)
• softwareLoopback(24)
• slip(28)
• frame-relay(32)
Admin Stat (ifAdminStatus)
The desired state of the interface.
• up(1)—The selected interface is ready to pass frames
• down(2)—The selected interface is not ready to pass frames
• testing(3)—The selected interface is being tested. No operational frames may be passed in this mode.
Operational Status (ifOperStatus)
The current operational state of the interface.
• up(1)—The selected interface is ready to pass frames.
• down(2)—The selected interface is not ready to pass frames.
• testing(3)—The selected interface is being tested. No operational frames may be passed in this mode.