Paxar MO 9742 - Manual (Page 31)

60
MO9740 Manual
3. Loosen the 4 screws (C) to take out print head from print head
module (12, 13).
4. Unplug the 2 print head cables from the connectors on print head
to take off the old print head.
5. Plug the 2 print head cables into the new print head.
6. Screw the new print head onto print head module (12,13).
7. Put the new print head module back onto the printer chassis in
the same way, which you released it from printer chassis.
(12)
(13)
(C)
61
MO9740 Manual
Technical Specifications
General Specifications
Specifications MO9742Pex MO9743PEx
Printing method Thermal Transfer & Direct Themal
Printing
Resolution
203 dpi
(8dots/mm) 300 dpi
(12dots/mm)
Printing speed
2 ~ 4 ips
(51~ 102 mm/s) 2~3 ips
(
51 ~ 75 mm/s)
Printing length
1” ~ 45”
(25mm ~ 143mm) 1” ~ 8”
(25mm ~203mm)
Printing width Max 4.1” (104 mm)
Memory
2 MB DRAM
2 MB Flash ROM
CPU type
32 bit RISC
microprocessor
Media sensor
Reflective
See - through
Display
LED
indicators x 2
Operation
interface
Button x 1
Communication
interface
Centronics
RS-232 serial
Bi-USB
(Full Speed)
Fonts
Int’l character sets standard
5 alpha-numeric fonts from .049”~ .23”H
(1.25mm~6.0mm)
All fonts are expandable up to 24x 244 direction
0º~270º rotation
Soft fonts are downloadable