Philips SE659 - Manual (Page 44)

42 Use more of your phone
9.9 Clock and Alarm settings
This feature allows you to set the date,
time and alarm settings for your phone.
The alarm feature is available only on the
handset.
The procedures in this section refer you
to the Clock & Alarm menu. However
if you access this menu from the base
station, the menu name is “Clock”.
9.9.1 Set Date and Time
1
Press
m in idle mode, scroll n to
Clock & Alarm (Clock on the
base), and press
o Select.
2
Set Date/Time is highlighted.
Press
o Select.
3
The last stored date and time are
displayed. Enter the current time
and current date (HH:MM DD/MM/
YY). Press
u to move the cursor
left, or press
d to move it right.
If using the 12 hour format, just
after setting the minutes, use
* to
switch between AM and PM.
4
Press
o OK.
• A validation tone is emitted and
the screen returns to the idle
mode.
You can change the format as shown in
the next section.
9.9.2 Set Time and Date Format
9.9.2.1 Set Time Format
1
Press
m in idle mode, scroll n to
Clock & Alarm (Clock on the
base), and press
o Select.
2
Scroll
n to Set Format and press
o Select.
3
Time Format is highlighted in the
display. Press
o Select, then scroll
n to select 12Hours or 24Hours.
4
Press
o Select to select the
option.
• A validation tone is emitted and
the screen returns to the Set
Format menu.
9.9.2.2 Set Date Format
1
Press
m in idle mode, scroll n to
Clock & Alarm (Clock on the
base), and press
o Select.
2
Scroll
n to Set Format and press
o Select.
3
Scroll
n to Date Format and
press
o Select.
4
Scroll
n to select DD/MM or MM/
DD and press
o Select to select
the option.
• A validation tone is emitted and
the screen returns to the Set
Format menu.
9.9.3 Set Alarm (Handset only)
1
Press
m in idle mode, scroll n to
Clock & Alarm, and press
o
Select.
Note
Note