Philips SE659 - Manual (Page 51)

49 Personal settings
3
Scroll
n to select Line 1 or Line 2
and press
o Select.
4
Scroll
n to your desired volume
level. The ring tone sounds at each
level.
5
Press
o OK to confirm.
• A validation tone is emitted and
the screen returns to the
Handset Tones menu.
To adjust ring volume on the base
station:
1
Press + or - in idle mode;
Select line appears.
2
Press
o Line 1 or c Line 2 to
select the line whose ring volume is
being adjusted.
3
Press + or - to adjust the ring
volume on the selected line.
If ring volume is set to off, the icon
will be displayed on the screen.
If ring volume is set to progressive
(handset only), the ringer will start at
level 1 and go up one level volume every
ring.
12.2.2 Set the Ring Tones
There are 15 ring tones available on your
handset, and 5 ring tones available for the
base.
1
Press
m in idle mode, scroll n to
Personal Set, and press
o
Select.
2
Scroll
n to Handset Tones on the
handset or Base Tones on the
base and press
o Select. Then
scroll
n to Ring Tones and press
o Select.
3
Scroll
n to select Line 1 or Line 2
and press
o Select.
4
Scroll
n to your desired melody.
The melodies will play as you scroll
them.
5
Press
o Select to set the ring
tone.
• A validation tone is emitted and
the screen returns to the
previous menu.
12.2.3 Activate/Deactivate Key
Beep
A single beep tone is emitted when a key
is pressed. You can enable or disable the
key beep.
1
Press
m in idle mode, scroll n to
Personal Set, and press
o
Select.
2
Scroll
n to Handset Tones on the
handset or to Base Tones on the
base and press
o Select. Then
scroll
n to Key Beep and press o
Select.
3
Scroll
n to select On or Off and
press
o Select to confirm.
• A validation tone is emitted and
the screen returns to the
previous menu.
12.3 Change the Display Language
Your handset and base can support
different display languages.
Note