Panasonic KX-FG6550 - Manual (Page 20)

1. Introduction and Installation
18 For assistance, please visit http://www.panasonic.com/consumersupport
1.9 Battery installation
1 Insert the battery ( 1), and press it down until
it snaps into the compartment.
2 Close the battery cover.
1.10 Battery replacement
If battery performance diminishes, make sure
you have cleaned the charge contacts and fully
charged the battery. After recharging if
“
Recharge battery” is displayed and/or
0688754 continues to flash, or “ Charge for 6
HRS” and 68885 are displayed, the battery
needs to be replaced.
Please use only a Panasonic battery. See
page 10 for accessory information.
L Only use a rechargeable battery. If you
install a non-rechargeable battery and
start charging them, the battery may leak
electrolyte.
1 Press the notch on the battery cover firmly,
and slide the cover.
2 Replace the old battery with a new one, and
close the cover (see the battery installation
procedure on page 18).
Attention:
A nickel metal hydride battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for information on
how to recycle this battery.
1
FG6550-PFQX2225ZA-en.book Page 18 Monday, August 8, 2005 8:16 PM