Panasonic KX-FG6550 - Manual (Page 72)

7. Answering Machine
70
Base unit:
Press {TRANSFER} during a call.
L The call will be put on hold.
2 Press {9} to hang up the call.
L After you press {9}, the caller will hear
the greeting message (page 67) and can
leave a message after the beep.
For Caller ID service users (page 44)
L Caller information will not be displayed while
the transferred caller is recording a message
or while that message is being played.
7.3 Listening to recorded
messages using the
handset (Remote
operation)
When the unit has recorded new voice
messages:
–
{ SEARCH} (soft key
1) will flash and “New
message” will be displayed on the handset
display.
– The Ringer/Message alert indicator (
2) will
flash if the message alert feature is activated
(feature 0# on page 90).
7.3.1 To play back messages
1 Press {MENU}, then {2}.
L Only new messages will be played.
L To switch to the receiver and listen to the
messages with privacy, press {TALK}.
You can switch back to the speaker by
pressing {SP-PHONE}.
L If you press {5} at this time, all the
recorded messages will be played.
L After playback, the voice menu will start
(page 71).
2 Press {OFF} to end the operation.
Note:
L While memo messages are played (page 72),
“
MEMO” will be displayed.
L To play back messages for the desired
line(s), perform the following steps. If you
select the line(s), memo messages (page 72)
will not be played.
1 Press {MENU}, then {2}.
2 To listen to messages for LINE 1, press
{#}{
1}.
To listen to messages for LINE 2, press
{#}{
2}.
{ OFF}
{ TALK}
{ SP-PHONE}
{ MENU}
{e}{v}
2
1
FG6550-PFQX2225ZA-en.book Page 70 Monday, August 8, 2005 8:16 PM