Planet Technology WGSD-8000 - Manual (Page 122)

User’s Manual of WGSD-1022/WGSD-8000
- 122 –
Figure 4-56 Bridge Multicast screen
The Page contains the following fields:
„ Configure Multicast
• Enable Bridge
Multicast Filtering
The check box allows to enable Bridge Multicast Filtering function.
• VLAN ID This identifies a VLAN to be configured to a Multicast service.
• Bridge Multicast
Address
Identifies the Multicast group MAC address/IP address.
• Interface
Displays Interface that can be added to a Multicast service.
The configuration options are as follows:
• Static, indicates the port is user-defined.
• Dynamic, indicates the port is configured dynamically.
• Forbidden, forbidden ports are not included the Multicast group, even if IGMP
snooping designated the port to join a Multicast group.
• None, displays the port is not configured for Multicast service.
• LAG
Displays LAG that can be added to a Multicast service.
The fields are the same for both areas.
Use the Add to List button when you want to assigns ports to a specific Multicast service address group.
„ Multicast Table