3 time – Planet Technology WGSD-8000 User Manual

Page 34

Advertising
background image

User’s Manual of WGSD-1022/WGSD-8000

- 34 –

• Subnet Mask

Enter the IP subnet mask for the interface.

The factory default value is 255.255.255.0

• Deafault Gateway

Enter the default gateway for the IP interface.

The factory default value is 0.0.0.0

• DNS Server

Enter the IP Address of the DNS Server. The Domain Name System (DNS)
converts user-defined domain names into IP addresses.

4.2.3 Time

In the Basic Setup Table, you can see the Time Setup (see figure 4-5), by which you can configure the time settings for the

Switch.

You can select SNTP Servers: Server1 for the primary SNTP server and Server2 for the secondary SNTP server.

Figure

4-5

Time screen

The Time page includes the following fields:

„

Set Time

• Use System Time

Specifies that the system time is not set by an external source but the Local time
settings.

• Use SNTP Time

Specifies that the system time is set via an SNTP server

„

Local Time

Advertising