Pelco DX2000 - Manual (Page 34)

34 Pelco Manual C690M-E (11/04)
Figure 13. Set Camera Screen
3. Do the following to select a range of time segments:
a. Checkmark the starting time, hold down the Shift key, and then checkmark the ending
time. The block changes color.
b. Click the bar to the right of the check-marked starting time, hold down the Shift key,
and then click the ending time’s bar. The block changes color.
c. Click one of the bars in the marked block. The program displays the Set Camera
screen (refer to Figure 13).
4. On the Set Camera screen (refer to Figure 13), checkmark boxes of the cameras you wish
to turn on for the selected time period.