Recommended audio output setting – Panasonic DMP-BD45 User Manual
Page 33
33
VQT2H86
Refe
re
n
c
e
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of items.
Press [FUNCTION MENU]
>
select “Other Functions”
>
“[OK]”
>
select “Setup”
>
“[OK]”
>
“Audio”
>
Set each item
For details of the each item, refer to page 26.
Recommended audio output setting
Example of connected equipment
TV via HDMI
*1
Receiver with
HD
audio
*2
decoder
via HDMI
Receiver without
HD
audio
*2
decoder
via HDMI
Receiver via OPTICAL
Setup menu
“Digital
Audio
Output”
“Dolby D/Dolby D
+/Dolby TrueHD”
“PCM”
“Bitstream”
“PCM”
“PCM”
“DTS/DTS-HD”
“PCM”
“Bitstream”
“PCM”
“PCM”
“BD-Video
Secondary Audio”
“Off”
“Off”
“Off”
“Off”
“PCM Down Conversion”
No effect
No effect
No effect
“Off”
*3
“Downmix”
“Stereo”
No effect
No effect
“Stereo”
*4
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*1
If connected to TV via except HDMI, these settings have no effect.
*2
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*3
If the connected equipment that does not support 96 kHz, set to “On”.
*4
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
DMP-BD65_45_VQT2H86_eng.book 33 ページ ２００９年１２月５日 土曜日 午後７時１７分