Panasonic SC-VK71D - Manual (Page 11)

11
Simple setup
RQT7700
Setting the time
When the unit is first plugged in, a demonstration of its functions
may be shown on the display.
If the demo setting is off, you can show a demonstration by turning
on the demo.
Press and hold [–DEMO].
The display changes each time the button is held down.
NO DEMO (off)
↔ DEMO ON (on)
You can reduce the power consumed in standby mode by
turning the demonstration off.
STEP
7
This is a 24-hour clock.
• The time is shown for about 5 seconds when you select “CLOCK” again.
• Reset the clock regularly to maintain accuracy.
DEMO function
SKIP
CLOCK/TIMER
– DEMO
1 2 3
Select
“CLOCK”. Set the time
(press within 7
seconds or so). Press to finish
setting the time.
RQT7700(06-11)2 5/14/04, 8:50 AM 11