Panasonic VQT2T10 - Manual (Page 24)

24
VQT2T10
Linked operations with
the TV
(VIERA Link TM “HDAVI Control TM ”)
Preparation
1 Set “VIERA Link” to “On” (> 31).
(The default setting is “On”.)
2 Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
3 Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so that
the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
∫ Setting the audio link with the TV
With the remote control;
≥ Select the actual TV audio connection on the main unit.
1 Press [START] and press [
3, 4] to select “Other
Functions” and press [OK].
2 Press [ 3, 4] to select “Setup” and press [OK].
3 Press [ 3, 4] to select “TV / Device Connection” and press
[OK].
4 Press [ 3, 4] to select “TV Audio Input”.
5 Press [ 2, 1] to switch “AUX”,“ARC” or “DIGITAL IN 1”.
Whenever the connection or settings are changed, reconfirm
the points above.
∫ Setting the audio link with the STB
With the remote control;
≥ Select the STB input channel on the TV.
1 Press [EXT-IN] to select “D-IN 2”.
2 Press [STATUS] to select “CABLE/SAT AUDIO ON”.
≥ If the input channel of the STB on the TV is changed or if you
want to change the device allocated for the linked
operations, select “CABLE/SAT AUDIO OFF” in step 2
above and then repeat steps 1 to 2.
≥ VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥ This unit supports “HDAVI Control 5” function.
“HDAVI Control 5” is the newest standard (current as of December, 2009)
for Panasonic’s HDAVI Control compatible equipment. This standard is
compatible with Panasonic’s conventional HDAVI equipment.
≥ Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
What is VIERA Link “HDAVI Control”?
VIERA Link TM is a new name for EZ Sync TM .
VIERA Link “HDAVI Control” is a convenient function
that offers linked operations of this unit, and a
Panasonic TV (VIERA) under “HDAVI Control”.
You can use this function by connecting the equipment
with an HDMI cable. See the operating instructions for
connected equipment for operational details.
Setting the audio link
VQT2T10~Body_mst.fm 24 ページ ２００９年１２月９日 水曜日 午前１０時１９分