Main unit (front), Main unit (rear), If the front cover comes off – Panasonic VQT2T10 User Manual
Page 7: Getting s tar te d
Getting s
tar
te
d
7
VQT2T10
1
Standby/on switch (POWER
Í/I) (> 15)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
2
Power indicator
The indicator lights when this unit is turned on.
3
Connect iPod (
> 26)
4
Adjust the volume of the main unit
5
Open or close the disc tray (
> 16)
6
Disc tray
7
SD card slot (
> 16)
8
Display (FL Display)
≥ “SRD” (SURROUND) lights when sound is output to the
surround speakers.
≥ The display is turned off when the volume is adjusted to
“0”. (
> 30)
9
Remote control signal sensor
Distance: Within approx. 7 m (23 ft.)
Angle: Approx. 20
o
up and down, 30
o
left and right
10 Select the source (
> 17)
11 Stop (
> 19)
12 Start play (
> 19)
∫ If the front cover comes off
1 Hold rear side of main unit by one hand and match up left
or right side protruding hook on the cover first with the
corresponding slot on the unit.
2 Push the hook firmly towards the unit until it clicks into
place. Then push the succeeding hooks one by one until
all have clicked into place.
3 Check that the cover now moves correctly.
≥ If it does not, remove it and repeat the above procedure.
1
AC IN terminal (
> 15)
2
Speaker terminals (
> 12)
3
Cooling fan
4
HDMI AV OUT terminal (
> 12, 13)
5
FM radio antenna terminal (
> 14)
6
DIGITAL AUDIO IN terminals (
> 12 , 13, 14)
Terminal 1 is designated for connection with the TV.
Terminal 2 can be used with equipment other than the
STB.
7
VIDEO OUT terminal (
> 12, 13)
8
AUX terminal (
> 13)
Main unit (Front)
OPEN/CLOSE
VOLUME
POWER
iPod
SELECTOR
SD CARD
1 2
3
4
5
6
7
8
9 10
11 12
Pull open.
Main unit (Rear)
AC IN
5
2
1
3Ω
6Ω
6Ω
FRONT
CENTER
SUBWOOFER
R
L
2
1
3Ω
SURROUND
R
L
-
AV
OUT
VIDEO
OUT
AUX
OPTICAL
2
1
DIGITAL AUDIO IN
+
6
FM ANT
75
(
)
Ω
L
R
AC IN
5
2
1
3Ω
6Ω
6Ω
FRONT
CENTER
SUBWOOFER
R
L
4
3
3Ω
SURROUND
R
L
-
AV
OUT
(ARC)
VIDEO
OUT
AUX
OPTICAL
2
1
DIGITAL AUDIO IN
+
6
L
R
FM ANT
75
(
)
Ω
1
2
3
4
5
6
7 8
Saving energy
This unit is designed to conserve its power consumption and save energy.
≥ This unit will automatically turn to standby mode after 30 minutes if it is inactive.
SC-BT228P_VQT2T10_eng.book 7 ページ ２００９年１２月６日 日曜日 午後４時３７分