Panasonic KX-MC6020 - Manual (Page 102)

13. Cleaning
102
13.3 Cleaning the paper chute
Clean the paper chute inside the unit when a line or a
dirty pattern appears at the top or bottom of your
recording paper.
1 Turn the power switch OFF.
2 Push the left cover open lever (
1) upward, then pull
open the left cover (
2).
Note:
L Do not touch the rollers (
4).
3 Clean the paper chute (
5) with a dry paper towel or
tissue.
Note:
L Do not touch the black belt (
6), or rub it strongly.
4 Close the left cover.
5 Turn the power switch ON.
Caution:
L During or immediately after printing,
the fuser unit (
3) gets hot. Wait until
the fuser unit cools down before
removing the jammed paper.
2
1
3
4
6
5