Panasonic KX-MC6020 - Manual (Page 82)

11. Help
82 For assistance, please visit http://www.panasonic.com/help
11.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Display Cause & Solution
“ BLACK TONER EMPTY”
“ CYAN TONER EMPTY”
“ MAGENTA TONER EMPTY”
“ YELLOW TONER EMPTY”
b
“ CHANGE SUPPLIES”
L The toner cartridge life is finished. Replace the toner cartridge immediately.
“ BLACK TONER LOW”
“ CYAN TONER LOW”
“ MAGENTA TONER LOW”
“ YELLOW TONER LOW”
b
“ CHANGE SUPPLIES”
L The toner cartridge life is near its end. Replace the toner cartridge as soon
as possible.
“ CALL SERVICE” L There is something wrong with the unit. Contact our service personnel.
“ CHECK DOCUMENT” L The document was not fed into the unit properly. Remove the document,
then press {Stop} to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 101)
and try again.
“ CHECK INSTALL INPUT
TRAY #1”
L The paper input tray is not installed correctly. Pull out the paper input tray
and re-insert it.
Note:
L “ #1”: Standard input tray
L “ #2”: Optional input tray
L “ #1+#2”: Standard input tray and optional input tray
“ CHECK PAPER” L You are printing on envelopes. Check the standard input tray to be sure that
envelopes are installed, then press {Black}/{Color}.
L The recording paper size is not same as the size that is selected for copy.
Change the recording paper size setting (feature #380 on page 58 or
feature #382 on page 58), and install appropriate recording paper.
L The recording paper size is not same as the size that is selected when
printing from the PC. Change the recording paper size setting (feature #380
on page 58 or feature #382 on page 58), and install appropriate recording
paper.
“ CHECK PICK UP INPUT
TRAY #1”
L Recording paper was not fed into the unit properly. Re-insert the recording
paper (page 98).
Note:
L “ #1”: Standard input tray
L “ #2”: Optional input tray
“ COLOR DRUM REPLACE”
“ MONOCHROME DRUM
REPLACE”
b
“ CHANGE SUPPLIES”
L The drum cartridge life is finished. Replace the drum cartridge immediately.
Note:
L The continuous use of an old drum cartridge may cause malfunction. To
prevent this, when the drum life is finished, the unit will stop printing after a
while, and printing will not be possible until a new drum cartridge is
installed.
“ COLOR DRUM LIFE LOW”
“ MONOCHROME DRUM LIFE
LOW”
b
“ CHANGE SUPPLIES”
L The drum cartridge life is near its end. Replace the drum cartridge as soon
as possible.