Philips 9160XL - Manual (Page 10)

ENGLISH 19
C
4 Close trimmer by pressing trimmer down.
5 Turn razor OFF.
Cleaning
C
◗ The tap symbol on the back of the razor
indicates that the razor can be rinsed under
running tap water.
◗ Regular cleaning guarantees better shaving
results.
◗ Always switch Razor OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not touch
razor heads with hard objects as this may dent
or damage precision-made slotted combs.
◗ Do not use razor if combs are damaged or
broken. Facial injury may occur.
◗ Unplug the charging stand. The charging stand
may be wiped clean using a damp cloth.
C
1 The faucet symbol will start blinking after
each shave to remind you that the razor
needs to be cleaned (except when the
bottom light burns red).
ENGLISH 18
2 Stretch your skin with your free hand so
blades can lift and cut whiskers. Gently
press razor to skin so the floating heads
can follow the contours of your face.
DO NOT press too hard.Too much
pressure can pinch the skin into the
combs.
3 Turn razor OFF by pressing the on/off
button once.
C
4 Put the protective razor head cap on the
razor to protect razor heads.
C
For optimal shaving results, replace razor heads
(model #HQ9) once a year or when the
replacement head symbol starts blinking.
Trimming
To groom sideburns and moustache:
1 Turn razor ON.
C
2 Push down spring-release trimmer switch.
The trimmer can be activated while the razor is
running.
C
3 Hold trimmer as shown and move in
downward strokes with gentle pressure.