Troubleshooting your phone, Power and startup, 3 troubleshooting your phone –1 – Polycom 1725-32504-001 User Manual
Page 27: Power and startup –1
3 - 1
3
Troubleshooting Your Phone
This chapter presents problems, likely causes, and corrective actions that
might occur with your Polycom® CX300 Desktop Phone. Problems are
grouped as follows:
•
•
Controls, Placing and Receiving Calls
•
•
•
If you still need assistance, contact your system administrator.
Power and Startup
Symptom
Problem
Corrective Action
There are power issues.
The Polycom CX300 desktop
phone has no power.
Do one of the following steps:
•
Verify that no lights appear on the unit
when it is powered up.
•
Verify that the USB port provides
power.
•
Try the phone in another USB port
where the power is known to be
working.
Note: The phone will not work if it is
connected to bus-powered USB hub.
The handset appears to be fine,
but there is no interaction
between the handset and the
Microsoft® Communicator “14”
client.
There may be problems with
your Microsoft Lync 2010 client
software or with the Microsoft
Lync 2010 software.
Contact your system administrator to
ensure your account is configured
properly and that your Microsoft Lync
2010 client software and the Microsoft
Lync 2010 software are properly installed
and configured.