Panasonic CY-BT100U - Manual (Page 26)

26
Troubleshooting
If You Suspect Something Wrong
Check and take steps as described below.
If the described suggestions do not solve the problem, it is
recommended to take the unit to your nearest authorized
Panasonic Servicenter. The product should be serviced only
by qualified personnel. Please refer the checking and the
repair to professionals. Panasonic shall not be liable for any
accidents arising out of neglect of checking the unit or your
own repair after your checking.
Warning
¡ Do not use the unit in an irregular condition, for exam-
ple, without sound, or with smoke or a foul smell, which
can cause ignition or electric shock. In case that such
conditions occur, immediately stop using this unit and
consult your dealer.
¡ Never try to repair the unit by yourself because it is dan-
gerous to do so.
The paired mobile
phone cannot be
automatically
reconnected.
The Bluetooth function of the mobile phone is disabled. (Some mobile phones are
turned off in a predetermined time in the power-saving mode or the like.)
● Refer to the operating instructions for the mobile phone and change the setting.
The mobile phone is selected to the setting so that automatic reconnection is not per-
mitted.
● Refer to the operating instructions for the mobile phone and change the setting.
Bluetooth connection is lost by key operation.
● Establish Bluetooth connection again by key operation.
✽ If Bluetooth connection is not successfully established, delete “CY-BT100” from the
mobile phone pairing list, and try pairing again.
Problem Possible cause a Possible solution