Panasonic TZ-DBS01 User Manual

Page 40

Advertising
background image

39

R

OLLER

G

UIDE

M

ENU

O

PERATIONS

Setup : Satellite Setup – Dish position

This screen allows you to position your Satellite antenna by having the Digital Satellite
Receiver provide approximate values for elevation, azimuth and tilt (marked in degrees),
after the you have entered your 5-digit zip code.

Procedure

r

In Sat Setup menu, press

pq

buttons to highlight Dish Position. Dish Position sub menu is

displayed.

r

Press

u

button to enter your Zip code. Use the numeric keys on the Remote Control to input

your zip code numbers. Press

u

button to move to the next position.

r

Press ACTION button to enter the new zip code. Elevation, Azimuth and Tilt are automatically
displayed after you press the ACTION button.

r

This information should be used to properly align and position the satellite antenna. These
values are approximations. Proper alignment should also be verified by using the signal strength
meter.

Setup : Satellite Setup – Signal Meter

Since the Digital Satellite Receiver is capable of receiving satellite programming from
multiple DIRECTV satellites, the user has the ability to choose one of 3 supported
satellites to receive signal strength and is primarily used during the system set-up
procedure. The Digital Satellite Receiver signal meter uses a horizontal digital signal
strength percent bar meter. The user will have the ability to select which transponder (1 to
32) they wish to measure the signal strength. The following is the signal meter screen

.

Procedure

r

In the Sat. Setup menu, press

q

button to highlight Signal Meter. Sub- menu is displayed.

r

Press

u

to highlight Satellite.

r

Press

u

to change Satellite

r

Press

pq

buttons to select Satellite A, B or C.

r

Press ACTION to enter the selection.

r

Press

q

button to highlight Transponder.

r

Press

u

button then

pq

buttons to choose one of 32 transponders. Select the transponder

that gives you a signal strength of 85%.

r

Press

t

two times to return to SETUP menu.

q

Sat Setup

Sat Ports

Dish Pos

Sig Meter

Zip code for position 92154

Elevation

Azimuth

Tilt

51 degrees

166 degrees

101 degrees

Dish position screen

Press

u

to change the zip code.

Enter zip code, press ACTION

Signal Meter Screen

q

Sat Setup

Sat Ports

Dish Pos

Sig Meter

Press

u

to change satellite.

Satellite

Transponder

u

A

1 of 32

Signal strength 91%

Advertising