Panasonic TZ-DBS01 - Manual (Page 64)

63
R OLLER G UIDE M ENU O PERATIONS
TIMER (Cont.)
Note: All Data fields must be entered prior to setting the view mode. Timers cannot overlap
between the timers. The first entered timer will override the other timers.
Timer Error Messages
The Digital Satellite Receiver will scan the timer data fields and notify you of any
problems before letting you set the viewing mode.
TIMER Activation
The TIMER is active when the Digital Satellite
Receiver is OFF or ON. The Digital Satellite
Receiver will switch to the selected channel at the
selected time set in the TIMER.
Timer Error Messages
Error Condition Error Message
The system time was not set NOTICE: Clock must be set
One or more start time elements was not
entered
NOTICE: Start time must be entered.
One or more stop time elements was not
entered
NOTICE: Stop time must be entered.
The channel number was not entered NOTICE: Ch number must be entered.
The day conflicts with the other timer NOTICE: Day conflicts with Timer 2 (or 1)
The start time conflicts with the other timer NOTICE: Start conflicts with Timer 2 (or 1)
The stop time conflicts with the other timer NOTICE: Stop conflicts with Timer 2 (or 1)
The stop time conflicts with start time NOTICE: Stop conflicts with start time