Polycom IP 600/601 - Manual (Page 5)


Installing.SoundPoint ® .IP.600/601.SIP
This section provides basic installation
instructions and information for obtaining
the best performance with the Sound-
Point
® IP 600/601 SIP phone. If you re-
quire additional information or assistance
with your new phone, please contact your
system administrator.
The SoundPoint ® IP 600/601 SIP User
Guide includes regulatory compliance
information that your system administra-
tor should review and can also be found at
www.polycom.com.
Powering Options for the SoundPoint ® IP 600/601
Both the SoundPoint ® IP 600 and SoundPoint ® IP 601 can be powered
from Power over Ethernet in addition to AC power sources.
For Power over Ethernet, both models will accept power over stan-
dards-based IEEE802.3af via the used or unused pairs over the Ether-
net cables plugged ino the LAN port.
For AC power source, both models are shipped with an adapter to
convert the AC voltage to the appropriate DC voltage required.
► There are differences between the DC voltages required by the SoundPoint ®
IP 600 and IP 601:
Requires a 12VDC rated power adapter as
supplied in the original packaging. Power
over Ethernet under the IEEE802.3af
standard also supplies sufficient wattage
to power the SoundPoint
® IP 600 phone
without use of the adapter above.
SoundPoint ® IP 601
Requires a 24VDC rated power adapter as
supplied in the original packaging. The
24VDC adapter supplies sufficient wattage
to power the SoundPoint
® IP 601 phone
and up to three SoundPoint ® IP Expansion
Modules (optional accessories). Power
over Ethernet under the IEEE802.3af
standard also supplies sufficient wattage
to power the SoundPoint
® IP 601 phone
and up to three SoundPoint ® IP Expansion
Modules.
When powering from an AC voltage source,
it is important to use only that power adapter
that shipped with the appropriate phone
.
Powering a SoundPoint® IP 600 phone from
a SoundPoint® IP 601 phone adapter, or
vice-versa, cannot guarantee correct operation
over all input conditions. If in doubt about
the appropriate power adapter that ships with
your unit, contact your system administrator
for futher details and/or options.
SoundPoint ® IP 600